Rovenlissa Roll-Out Garage Mat

A heavy roll-out garage floor mat that covers a bay in one unroll — no adhesive, no curing, just roll it out over a swept floor and park on it, protecting the slab from oil, salt and winter drips. A tough, ribbed PVC with raised edges that hold spills and melt-water in; trimmed to the bay with a knife. The instant garage floor for a rental or a quick upgrade.

• Type: roll-out ribbed PVC garage floor mat
• Build: tough ribbed PVC, raised containment edges
• Install: roll out over a swept floor; trim to the bay, no adhesive

For a garage or workshop floor. A garage floor must be sound, clean, dry and free of oil and loose material before a covering goes down; interlocking tiles and roll-out mats need a reasonably flat, dry slab, and a coating needs the right preparation — degrease, repair and, for most resin coatings, grind or etch the concrete, with the slab tested for moisture — or the finish will not bond and can peel. Resin and epoxy products are chemicals: follow the mixing ratios, pot life, ventilation and curing times on the data sheet, and wear the stated protection. A fresh coating is slippery when wet until fully cured. Tiles and mats resist most workshop fluids but check the chemical and hot-tyre notes. CE marked where applicable. The statutory 14-day right of withdrawal applies to consumers.