Rovenlissa Interlocking Floor Tiles

A pack of interlocking garage floor tiles that click together into a hard-wearing, drainable floor you can lay in an afternoon with no glue, lifting an old slab into a clean, modern garage. Impact- and oil-resistant tiles that take a car and a trolley jack; laid loose over a flat, dry floor and finished with edge ramps. Add packs to cover the area. A tough floor you can take with you.

• Type: interlocking garage floor tiles, pack
• Build: impact- and oil-resistant, click-together, drainable
• Install: laid loose over a flat dry floor, no glue; add packs to fit

For a garage or workshop floor. A garage floor must be sound, clean, dry and free of oil and loose material before a covering goes down; interlocking tiles and roll-out mats need a reasonably flat, dry slab, and a coating needs the right preparation — degrease, repair and, for most resin coatings, grind or etch the concrete, with the slab tested for moisture — or the finish will not bond and can peel. Resin and epoxy products are chemicals: follow the mixing ratios, pot life, ventilation and curing times on the data sheet, and wear the stated protection. A fresh coating is slippery when wet until fully cured. Tiles and mats resist most workshop fluids but check the chemical and hot-tyre notes. CE marked where applicable. The statutory 14-day right of withdrawal applies to consumers.